Where do I plug in my own devices?

 

If you have eeros, you can plug your devices into any unused ports on the eero equipment.  

  • It is best to plug into the eero that is connected directly to the ONT.   
  • It is also okay to plug into other eeros that are wire back to the first eero.   
  • We don't recommend plugging into the eeros that connect to the network over mesh, because the Internet traffic from your wired devices may negatively impact the devices connected over Wi-Fi.  
  • We don't recommend plugging into the eero PoE 6 access points, because we don't want you to take the access points off the wall/ceiling.   
  • If there are not enough ports, you can buy a simple unmanaged switch to expand the number of ports.  There are 5-port and 8-port models available online or in store for $15-$30.


If you have Managed Wi-Fi Premium, then you can plug an unmanaged switch into a designated port on the Adtran managed switch.  Then you can plug your devices into the unmanaged switch.  

  • If you have an 8-port Adtran switch, plug into the port labeled 8.   

 

Port 1.jpg



  • If you have a 24-port Adtran switch, plug into the port labelled 22.  

   Port 2.jpg